Cooling tower bird control

	Non-Lethal Bird Control Specialist
	*Humane, Effective and Affordable Solution for You*
	*Serving All of Arizona and Las Vegas, Nevada*
	*CALL US TODAY 602-942-6550 or 1-877-828-2473*

Cooling Tower Project

This project involved netting off 3 very large cooling units for a milk bottling plant and cool storage.

Bird were getting into the motors and fan belt areas which caused the chiller motors problems and the birds didn't fair too well either.

We had to build all the raised station poles on site and weld up the cross connectors much like an erector set so they all fit into each other.

The idea was to raise the 3/4" net above the water shooting out from the top of the vents and the high volume of air coming up from the large fans.

As you can see, we were working above the chiller units that were already raised two stories above the ground and we had to move plywood around where we would walk so we would not fall through the vents on the top of the chillers.

Back to the main projects page

8' Frame sections had to be made and installed onto the steel I beams to support the netting and cable system.		Work was done atop chiller units while they were running, we had a good upward breeze all the time.
Outside edges of the net had to be attached using a 60' bucket lift to reach from outside the wall.	50' x 100' Nets had to be pulled across the tops of the support bracket and cable system.
	All 2" tubing had to be welded and attached much like an erector set and then tubes had to be fitted together.
Looking down onto the net, it's nice and straight and designed to last many years.	View from the parking lot below	As the sun sets in the west we end another day where it was 112 degrees and we all got blisters from working with steel all day.

Arizona Wings-N-Stings LLC - 3431 W. Thunderbird Rd. # 13-261 Phoenix, Arizona 85053

E-Mail: Information@azwns.com

Call Today - Phoenix 602-942-6550 / 480-969-2337

Statewide & Las Vegas, Nevada 1-877-828-2473